Spray Booth Yoki Star Yubase-T-Plus

Yoki Star Yubase-T+ - Spray Booth Spray Booth of joint Chinese Italian production, which has been producing and improving for fifteen years. During the production of the chamber, only reliable components and assemblies are used, the quality of which is proven by long-term operation: burners of the Italian company Riello, floor and ceiling filters from well-known manufacturers. Features; - an electronic control panel with temperature and drying time programming contains all the necessary start-up and adjustment equipment, as well as burner safety systems, fan emergency stop alarms, lighting switch-on indications, a system for setting and adjusting the temperature in the chamber; - stable controlled thermal mode, with minimal temperature deviations, is provided by the Italian Riello diesel burner with a reliable ignition function; - Riello diesel burner fuel pump, unpretentious in operation and well-proven in difficult working conditions with domestic diesel fuel; - uniform distribution of air flow in the paint chamber at the time of painting; - the ideal laminar air flow in the chamber is provided by a system of its distribution in the form of pallets with variable perforation, located under the paint-sand filters in the floor container of the chamber; - high temperature and highly efficient heat exchanger; - high-quality filters with a filtration rate of 95-98%; - easy-to-use ceiling and floor filter replacement system; - high level of illumination and lack of glare is provided by two rows of lamps; - three-section entrance gates with surveillance windows, the presence of separate side doors for service personnel, creates additional convenience during the operation of the camera. For easy installation and operation, we can: - install the ventilation group on the left, right or rear; - side door in the specified location. Camera specifications: Internal dimensions; 6. 900x3. 900x2. 650mm (Lxwxh) External dimensions ; 7.000 X 5.350 X 3.400 mm (Lxwxh) Front door ; 3-sash, dimensions 3,000 x 2,600 mm( Wxdxh), made of steel, uncoated edges, tempered glass insert Staff doors; 1 PC., dimensions 700x2, 000 mm( Wxdxh), tempered glass insert Walls; Thickness 50 mm, width 1,000 mm, EPS insulation, coated with Non-Ferrous Steel, thickness 0.426 mm, inside and out. PGP, covered with steel on both sides. Roof; Made of 0.6 mm galvanized steel plates Ceiling lighting; To the left and right on the ceiling there are 5 lighting devices, 10 in total. Each device is equipped with LED lamps Side lighting; On the left and right there are 5 lighting devices, 10 in total. Each device is equipped with LED lamps Camera Base: Floor; 2 rows of sashes grilles (30 * 4 mm strip steel and 10 mm twisted steel) with electroplating. The load weight is 600 kg/wheel. 2 ramps, dimensions 520 * 2,000 mm (w*D) Platform; Made of galvanized steel 300 mm high Load-bearing frame; Made of square steel tube. Dimensions 40 * 80 mm (w*D) Features of Yoki STAR paint chambers: Burner (diesel fuel) Riello G20 Engines 2 PCs.; Supply fan, kW 7,5 Exhaust fan, kW 5.5 Maximum heat output: 200,000 kcal / H Heat exchanger power: 200 kW Air exchange: 25000 m3 / h We perform the following types of work:: * design Binding of the camera to the production room of Zakabluk; * installing cameras; * warranty * maintenance